Fwiw I used to daily an x210 and then an x230 in IT and pretty frequently typed with one hand while carrying with another without the weight bugging me but your mileage may vary.

You can definitely send them flying and not damage them my coworker launched theirs across the office and the bezel just snapped back together.

I have a T480 now since I do more dev work and needed a slightly bigger keyboard/screen and it’s phenomenal with Qubes and 48gb of memory on the quad core i5. Love the ease to repair I just swapped a motherboard on it in around 30 minutes and was back up and running

This is pretty great advice to get into it. I previously ran 3 poweredge 2950s but have since switched to nothing self hosted and back to everything self hosted but on a much leaner setup with a NUC and 14tb WD my book drive with a dual Noctua 4020 fan shroud I 3d printed that it absolutely needed as I killed the original drive in two weeks.

My replica is just a 14tb in my desktop I run rsync to pull the data occasionally after checking SMART status on the primary. It’s not versioned or perfect but it works great to give me a chance to backup my jellyfin media. Everything I care about also gets backed up via restic.

Eventually plan to run a build with the Modcase MASS with multiple drives but for now this setup has been working fantastic.

I just use nextcloud as a target for backups (Aegis, Signal, QkSMS). Apps such as KeePassDX I have load the file via nextcloud. My contacts and calendar go through it as well, photos are just set to auto upload along with a few other directories.

As for the home screen layouts, I just take screenshots once I have it how I like and try to remember to take them again if I change stuff.

It’s not a full backup but I’m back up and running fairly quickly (Pixel 5A died on me 3 times in under a one year lifespan per device).

They used to dominate the consumer market prior to Ryzen so might have something to do with it but I got no evidence lol

Me after getting those dumbass Canary cameras that cost $200 a piece then they completely wrecked the free tier then started giving them away for free to get more subscribers.

Wyze cams with wz_mini_hacks firmware offline in a VLAN with Frigate and Home assistant from here on out!

Really depends on the make, you can get Mitchell and AllData prior to the subscription model (takes about a TB of space, from 1980s to 2013) to help with diagrams and disassembly and reassembly. Mitchell’s wiring diagrams really are a lifesaver.

Dealer level software/scanner combo you can get from obdii365, I got a Hyundai scanner from them and it worked well but you want to run the software in a VM or isolate it some other way and probably wouldn’t network it.

Vxdiag is pretty solid as well for the dealer software/scanner and you can usually get via Amazon but again I wouldn’t trust the software. I have their ford one and used it with IDS to set the VIN on an electronic power steering rack.

The software itself you can find via Google if it’s all you need but typically the scanner is very specific to the software for the dealership stuff

Be careful depending on the model, some of those run hot. I managed to kill one in under 2 weeks just by copying a large amount of data to it and had to print a fan shroud for it’s replacement to keep the temps at a reasonable level.

I use iptvini since it’s pretty cheap ($80 for 2 years). For us it’s really just an easy way to watch some sports, running the arr stack and Jellyfin so any shows we’re watching just go through that since ads on TV suck lol

Can connect with Infuse to your server, swiftfin has a ways to go to be ready for primary use

You probably unknowingly break multiple laws a day settle down

I see no reason to not use both. Got a show you’re watching that has new releases? Have Sonarr track it and auto download them as they release. Want to try a new show but not sure you’ll like it or just a single season? Debrid.

I will say, Jellyfin with Infuse on apple tv is rather easy to use for non technical people where they would struggle with stremio a little more.

Still a far cry from the early XBMC/Kodi days where you had to manually try like 20 sources before you could watch both options really are great

Heavily agree, a lot of content had issues playing for me with swiftfin. No issues at all with Infuse other than the fact that intro skipper doesn’t work with it

Lidarr for most, soulseek (slskd) for anything Lidarr can’t get in FLAC

Yeah and whatever you do definitely don’t use Jellyseerr for Jellyfin setups or Overseerr for Plex setups

Do you have any of their doorbells? I went back to a physical doorbell button with home assistants sky connect dongle linked up to a motion sensor at the door just so I know when someone’s there but would love to get a camera up there that isn’t some ring bs

These cameras work very well with the wz_mini_hacks firmware completely cut off from the internet. I’m using frigate and home assistant for notifying and it’s honestly way better than the wyze app ever was.

I’m running frigate on a Lenovo m900 with the coral USB accelerator and my CPU usage is super low so you could probably get away with the Pi4!

Wow he must’ve struck a nerve with you to get this reply

Yep and reddit is slowly closing themselves off, I wouldn’t doubt you eventually have to be logged in to even view anything.

Forums are still around but it’s usually just the older established ones (I’m on stangnet.com and corral.net regularly but they’re car related so lots of technical info). Everything new either went Reddit or Discord it feels like and I’ll never install Discord.

I think Jellyfin started a forum post reddit but I haven’t gone looking yet for that one.

Information is absolutely getting harder to find online and if archive.org goes down we’re really screwed

I’ve got 3 Wyze cam v3s running the wyze mini hacks firmware sectioned off in a VLAN that can only reach Frigate (no internet).

I have frigate running on a cheap Lenovo M900 I got on ebay for $65 that has an i7 and 8gb of memory and it actually does fairly well without the Google coral USB TPU as long as that was the only service on that system. Trying to run Frigate on my NUC with other services without a TPU caused some issues with CPU usage but with a TPU I would bet it’ll all run on the one system.

Home assistant works exceptionally well for notifying, one of my cameras I have on UDP since the signal isn’t great and get a couple artifacts that trip it up but other than that it has been much quicker to notify and more reliable than anything in the consumer market I’ve tried so far.

I used gpt4 for terraform and it was kind of all over the place in terms of fully deprecated methods. It felt like a nice jumping off point but honestly probably would’ve been less work to just write it up from the docs in the first place.

I can definitely see how it could help someone fumble through it and come up with something working without knowing what to look for though.

Was also having weird issues with it truncating outputs and needing to split it, but even telling it to split would cause it to kind of stall.